Skip to content

Daily ECB midpointFrankfurter / ECBFree to use

CurrencyCentral

SMB FX Playbook

Failed International Payments: Causes and Fixes

Office desk with a laptop, desk phone, folder, and mug, city skyline outside

8 min read · Updated October 2026

An international wire fails when a bank in the chain cannot apply it. The money is then sent back or held. The usual causes are a wrong account identifier, a name that compliance cannot clear, or an intermediary that will not forward the payment.

Ask your bank for the status and the unique end-to-end transaction reference before you send the money again. If the return is converted into your home currency, it can come home at a new rate.

Key takeaways

  • An IBAN is at most 34 digits, and only the first four are fixed. A German IBAN is 22 digits.
  • A BIC is at most 11 characters. A US routing number is 9 digits, and it is not an IBAN.
  • If a US sanctions rule prohibits a wire and no blocked person has an interest, the bank rejects it and returns it.
  • Every SWIFT gpi payment carries a UETR. In a late 2020 sample, the median time was 1 hour and 38 minutes.
  • A return converted at a new rate can come home short of the dollars you sent. Ask which currency you will get back.

Why do account details get a payment rejected?

The account number has to match the format the receiving bank uses. The Deutsche Bundesbank SEPA standard says an IBAN is at most 34 digits. Only the first four are fixed: a two-letter country code, then a two-character check. The rest is the national account number, and the length depends on the country.

A German IBAN is 22 digits. The Bundesbank IBAN rules put DE and the check first, then an eight-digit bank sort code and a ten-digit account number. Shorter account numbers are padded with leading zeros. A wrong length or a failed check stops the payment before anyone tries to credit the account.

The same SEPA page describes the BIC, often called the SWIFT code. It is at most 11 characters. Four alphanumeric characters name the institution. Two are the country code. Two are the location code. The last three are an optional branch code, and they can be empty. Do not add or drop a branch the supplier did not give you.

A US routing number is a different code. The ABA routing number policy defines it as 9 digits: a Federal Reserve routing symbol, an institution identifier, and a check digit. It identifies a US bank. It does not identify a supplier account in another country. SWIFT, IBAN, and routing codes for SMBs walks through the fields. Copy the IBAN from a bank document, not from an email screenshot.

When does a name or a sanctions check stop the wire?

The OFAC FAQ on blocking and rejecting separates two outcomes. If a blocked person has an interest in the transfer, the bank blocks the funds and reports the block. If the transaction is prohibited and there is no blockable interest, the bank rejects it. OFAC says the payment is not processed and is returned to the originator.

OFAC's example of a reject is a US bank and a wire between two firms that are not on the sanctions list, when processing the wire would be a prohibited service, such as trade with Iran. A payment in which a blocked bank has an interest is blocked instead. Blocked and rejected transactions are reported to OFAC within 10 days.

Screening software also flags names that are not true matches. A close name can hold a live wire for human review. Use the legal name on the account. Put the invoice number in the payment reference.

World map on an office wall above a laptop and stacked shipping cartons

What does an intermediary bank change?

A CPMI paper from February 2022 says cross-border payments on SWIFT involve, on average, just over one intermediary. Payments with three or more intermediaries were less than 1 percent of volume. A wrong intermediary BIC, or a bank that will not handle the currency, is where the payment stalls or turns around.

The sample is September and October 2020, about 20 million SWIFT gpi payments that received a credit confirmation. Every payment on SWIFT gpi has a UETR. The median processing time was 1 hour and 38 minutes. The average was 8 hours and 36 minutes. Routes ranged from a median of less than five minutes to more than two days. The long part was often the beneficiary bank, from receiving the instruction until it credits the customer. Capital controls, compliance checks, short hours, and batch processing sit in that step. These figures describe gpi payments in 2020. They are not a service level for your wire today.

How do you trace it?

Ask your sending bank for the UETR and the status. The CPMI paper uses that reference to measure the payment from the originating bank's instruction until the beneficiary bank credits the customer. Do not send a second payment while the first is still in flight.

The CPMI sample covers SWIFT gpi only, and it leaves out card networks. International payment methods compares wires with the other ways a small firm pays. Ask your provider which reference that payment carries.

What FX do you lose if the money comes back?

OFAC says a rejected wire is returned to the originator. If you bought euros to send the payment, the bank may sell those euros back into dollars. The second rate can differ from the first. You can get back fewer dollars than you sent, before any return fee.

Illustration only, not a live rate. You convert USD 10,000 into EUR 8,000. The payment is rejected. The EUR 8,000 is sold back for USD 9,600. The USD 400 gap is the exchange difference. Ask whether the funds will return in euros or already in dollars. If you can hold the euros, you can skip that second conversion. Book the difference apart from the original expense. Realized and unrealized FX gains shows how. Compare the outbound amount with a reference midpoint first, using hidden FX spreads.

What belongs on the checklist before you send?

  • Copy the IBAN from a bank letter or portal. For a German account, expect 22 digits starting with DE.
  • Check the BIC: 8 or 11 characters, with a two-letter country code in positions 5 and 6.
  • For a US account, use the 9-digit wire routing number that bank gave you. Do not invent an IBAN.
  • Use the legal name on the account, and put the invoice number in the reference.
  • Confirm a new account on a phone number or portal you already trust. Invoice fraud on overseas payments is the pattern where the email account number is the fraud.
  • Keep the UETR. If the payment is late, get the status before you pay again. If it is rejected, record the return currency and the rate.

FAQ

Is a rejected wire the same as a blocked wire?

No. OFAC says a rejected payment is returned to the originator. A blocked payment is held because a blocked person has an interest in it.

Will the supplier's bank always see my UETR?

The CPMI paper tracks the UETR on SWIFT gpi, and your bank can look that reference up. Ask which reference a payment carries if it did not go through that service.

Can a correct IBAN still fail?

Yes. Sanctions screening, a missing purpose of payment, or an intermediary that will not handle the currency can still stop it. The status from your bank names the cause.

Should I resend the same day?

Not until the first payment is confirmed rejected or returned. Two live payments can both arrive.

Who pays the exchange gap on a return?

You do, if your bank converts the returned currency at a new rate. Ask for the original currency back if you can hold it.

Before the next transfer

CurrencyCentral does not send wires or recover returned funds. Use the field formats and the rate comparison in the guides linked above, and keep the UETR with the invoice until the supplier confirms the credit.

Sources