SMB FX Playbook
Get Paid by US Clients via ACH as a Non-US Business

9 min read · Updated November 2026
US clients often want to pay the way they pay domestic vendors, by ACH. A non-US business is not on that network just because it has a bank account at home. You need US routing details, or a provider that issues them, before the client's accounts payable team can send an ACH credit.
Key takeaways
- ACH means Automated Clearing House. Nacha governs the network. The Federal Reserve describes it as a nationwide network of batched electronic credits and debits among depository institutions.
- Nacha says standard ACH takes one to two days, as the sender designates, and Same Day ACH can take as little as a few hours on the same business day. Neither one is a wire.
- A non-US firm receives an ACH credit on US account details: a routing number and an account number in the name the bank or provider will accept.
- The credit is in US dollars. Converting to another currency is a separate step. Compare that rate with a dated reference midpoint. This page does not publish a fee table.
- Check the legal name on the account, which ACH window the client used, and what a returned payment does to the invoice.
What is ACH?
Nacha's about page says Nacha governs the ACH Network, the payment system for Direct Deposits and Direct Payments, with the capability to reach all U.S. bank and credit union accounts. That page says there were 35.2 billion ACH Network payments in 2025, valued at $93 trillion. Nacha's 2025 volume statistics put the same year at 35.19 billion payments and $93.00 trillion transferred.
The Federal Reserve FedACH page says the ACH system is a nationwide network through which depository institutions send each other batches of electronic credit and debit transfers. It names the Reserve Banks and the Electronic Payments Network as the two national ACH operators. Nacha's how-it-works page names the two operators as the Federal Reserve and The Clearing House, and says Nacha governs the network but does not itself process the payments. Participants follow the Nacha Operating Rules.
On a credit, the sender's bank, the ODFI, puts the payment in a file. An operator sorts the file. The receiving bank, the RDFI, credits the receiver. Nacha uses payroll direct deposit as that picture. A client paying your invoice is the same shape of credit. They push dollars to the account number you gave them.
Nacha says ACH credits can settle the same day, the next banking day, or in two banking days. It estimates that 80 percent of all ACH payments, credits and debits together, settle in one banking day or less, counting both regular ACH and Same Day ACH. The about page says the network moves money in as little as a few hours with Same Day ACH, or in one to two days with standard ACH, as the sender designates. The Same Day ACH page says those payments are sent and received within hours on the same business day. That page also reports 1.4 billion Same Day ACH payments in 2025, worth $3.9 trillion. Faster than a later batch is still not a promise that your books can close the invoice the minute the client clicks pay.
On cross-border volume, Nacha's 2025 statistics, in the section titled Payments beyond borders, report 120.85 million payments and $374.03 billion transferred. This page uses those 2025 figures from Nacha. It does not repeat older international totals that product blogs attribute to Nacha.
How does a non-US business get paid by ACH?
Wise's ACH guide for Australian businesses, which the page dates 02.06.26, says ACH is a US-only system and that an Australian business is not on it through a local bank account. To receive ACH, that guide says you need US account details, a routing number (an ABA), and a USD account, which you then share so the US customer can pay by ACH.
A practical path:
- Open a US receiving account at a bank, or use a provider that issues US ACH details for your business. This page does not rank providers. Payment gateways for getting paid in other currencies is the questions list for that choice.
- Confirm the legal name on those details matches the name on the invoice. Wise's international ACH explainer lists the recipient's full name as it appears on the bank account among the details a payment needs.
- Put the routing number, the account number, the account name, and the currency (US dollars) on the invoice. Say ACH credit, rather than wire, if ACH is what you want.
- Ask the client which window they will use. Nacha says the sender designates standard timing of one to two days, or Same Day ACH when that is the service they send.
- When the dollars land, they are US dollars. If you need another currency, conversion is a second step. The Australia guide says you can hold the USD or convert later, and that on larger payments the conversion cost can be higher than the ACH transfer fee itself. Get the rate from your provider. Compare it with a dated reference midpoint. The converter on this site is a reference, not the rate you will be dealt.
- Reconcile the credited amount to the invoice. A short credit can be a fee. A credit that never arrives is not a paid invoice. The wider fee split is in getting paid by foreign clients without losing fees.

How should the client's AP team compare ACH with a wire?
ACH and a wire are different rails. Nacha describes ACH as files of payments that an operator sorts. Credits can settle the same day, the next banking day, or in two banking days. A wire is a separate payment the client's bank sends on its own. Wise's international ACH explainer, which the page marks last updated 01.09.26, says ACH is processed later in a batch, is not usually the fastest way to move money, and is generally cheaper than a bank wire, while wires are faster and typically carry higher fees.
That is a qualitative comparison from that explainer. It is not a fee schedule, and this page does not copy one. Your client's bank, and your receiving provider, publish the prices that apply to this invoice.
For the accounts payable team, the practical difference is the instruction on the invoice. ACH needs the US routing number and the account number. A wire often needs a different set of codes, covered in SWIFT, IBAN and routing codes. If you print both, label which numbers are for ACH and which are for a wire, so the client does not mix them. The wider rail comparison is international payment methods in 2026.
What should you check before you chase the payment?
- Legal name. The name on the receiving account should be the name the client will type. Confirm it with the provider that issued the details, not from an old invoice footer. Wise lists that name, as it appears on the account, as a detail the payment needs.
- Same-day versus standard. A client who says they sent it today may have originated a standard credit, which Nacha says may settle the next banking day or in two banking days, or a Same Day ACH credit, which can complete within hours. Ask which one they sent. Do not tell your own supplier the cash is in hand because the client clicked send.
- Returned payments. Wise's Australia guide notes that ACH payments can be returned or reversed when something is wrong with the payment. If the client says the payment was returned, the invoice is unpaid. Ask their bank for the return reason, correct the detail that failed, and have them send a new credit. Do not switch the account number because a new email arrived. The callback in invoice fraud on overseas payments still applies.
- Currency. An ACH credit into a US dollar balance does not convert itself into your home currency. Decide whether you will hold the dollars or convert, and record the rate if you convert.
FAQ
Can any non-US company receive a US ACH credit?
Only with US receiving details that a bank or a provider will actually credit. A home-country account number is not a US routing number. Confirm the provider can receive ACH credits for a business in your country before you print the details on an invoice.
What numbers go on the invoice?
The account name, the US routing number, and the account number, plus a line that the payment is an ACH credit in US dollars. Wise lists the name as it appears on the account among the details a payment needs. The instructions from your provider control anything beyond that.
Is same-day ACH instant?
No. Nacha says Same Day ACH sends and receives payments within hours on the same business day. The Nacha about page says standard ACH takes one to two days, as the sender designates. Hours are not the same thing as a balance you can already spend, and they are not a wire.
Will the client pay less to use ACH than to use a wire?
Wise describes ACH as generally cheaper than a bank wire because it is batched, and describes wires as faster with typically higher fees. That is a qualitative comparison from that explainer, dated on the page as last updated 01.09.26. It is not a fee schedule. The price that matters is the one on the client account and on your receiving account.
What if the money arrives short, or comes back?
Compare the credited dollars with the invoice before you call it paid. If the client says the ACH was returned, the invoice is unpaid. Ask for the return reason, fix the detail that failed, and have them send a new credit. A conversion into another currency is a separate difference from a short ACH credit.
Does CurrencyCentral receive ACH or issue US account numbers?
No. CurrencyCentral publishes guides and a reference-rate converter. It does not hold accounts or collect payments.
If the hard part is the fee after the dollars arrive, use Get Paid by Foreign Clients Without Losing Fees. If the hard part is which rail the client should use at all, use International Payment Methods Compared (2026).
Sources
- https://www.federalreserve.gov/paymentsystems/fedach_about.htm
- https://www.nacha.org/content/about-us
- https://www.nacha.org/content/how-ach-payments-work
- https://www.nacha.org/content/ach-network-volume-and-value-statistics
- https://www.nacha.org/same-day-ach
- https://wise.com/us/blog/international-ach-transfer
- https://wise.com/au/blog/ach-payment
